Your - TRM – Timer Relay Module provides Adjustable Output Timing from 0.5 to 150 Seconds.

This module has two types of outputs Dry Contact and Voltage Output.

TRM has two momentary contacts:

• Start - WIRE CONNECTION
• Reset - PUSH BUTTON

DESCRIPTION

• The timing period is initiated by momentary closing the trigger input WIRE CONNECTION.
• The output timing is adjustable from 0.5 - 150 seconds. LED visual indication of the timer status ON/OFF. Timed output is Dry Contact and the input Voltage. 
• Timing adjustment turn pot CW (clock wise) to decrease and CCW (counter clock wise). 1 turn = 6 seconds  
• Use the Reset button to stop the timing period at any time.

Note: Use the correct screwdriver to adjust the pot. Please power down the unit and check the output timing.

FEATURES

• A RDM (Reed Switch and Magnet) could be used to trigger/start the TRM.
• TRM can be used to trigger a Crossing Bell Sound recorded on a RSM and the RR Crossing Blinker the BLHO in the same time.
• Use the Dry Contact Output to turn a light in a tunnel or any other type of lighting circuits.

WARRANTY - 2 YEAR FROM DATE OF PURCHASE

CARE - To enjoy your TRM for a long time:

• Keep it dry. If it gets wet, wipe it dry immediately.
• Use and store the TRM only in normal temperature environments.
• Handle the TRM gently and carefully. DO NOT DROP IT.
• Keep the TRM away from dust and dirt.

MODIFYING OR TAMPERING WITH THE TRM's INTERNAL COMPONENTS CAN CAUSE A MALFUNCTION AND WILL INVALIDATE ITS WARRANTY.

SPECIFICATIONS

Copyright © Train Set Electronics. All rights reserved.