Your - TNF – Timer On Off, Cycling Timer, Repeat Cycle Timer, On/Off Timer has two outputs.

This module has two types of outputs Relay Dry Contact and Voltage Output.

TNF provides repeat cycle mode of operation, the output turns ON and OFF continuously on repeating basis.

DESCRIPTION

• Cycling timer starts as soon as power is applied. Each output can be turned off using a switch.
• A LED provides the status ON /OFF. Timed output is Dry Contact and the Input Voltage. 
• The cycling timer can be adjusted, turn pot CW (clock wise) to decrease and CCW (counter clock wise) to increase).
• Min and Max Timing - Fully CW On Time = 8 sec., Off Time = 4 sec. Fully CCW On Time = 15 sec., Off Time = 11 sec.

Note: Use the correct screwdriver to adjust the pot. Please power down the unit and check the output timing.

FEATURES

• TNF can be used to continuously turn on and off the lights in a high rise buildings, structures or portions of the layout circuits.
• Realistic scenery and layout lighting.
• Use the Dry Contact Output to turn a light in a tunnel or any other type of lighting circuits.

WARRANTY - 2 YEAR FROM DATE OF PURCHASE

CARE - To enjoy your TNF for a long time:

• Keep it dry. If it gets wet, wipe it dry immediately.
• Use and store the TNF only in normal temperature environments.
• Handle the TNF gently and carefully. DO NOT DROP IT.
• Keep the TNF away from dust and dirt.

MODIFYING OR TAMPERING WITH THE TNF's INTERNAL COMPONENTS CAN CAUSE A MALFUNCTION AND WILL INVALIDATE ITS WARRANTY.

SPECIFICATIONS

Copyright © Train Set Electronics. All rights reserved.