Your - SRM - 20-Second Recording Module provides quality recording and playback for a sound or a voice message up to 20 seconds.

Because this recording module is digital, you can record a new sound or message as many times as you like.

RECORDING

• Hold down the R (record) button.
• Play your sound or your voice message (up to 20 seconds).
• Release the R button to stop recording.

Note: A new recording replaces the previous one.

PLAYBACK

• Press the P button. The SRM plays your recording.

Note: If playback volume is to low, increase the volume during the recording.

         If you are unhappy with your recording, record a new one.

When playback slows down, replace all the batteries. Do not mix old and new batteries.

INSTALLING THE BATTERIES

• Your SRM comes with Type 357 batteries (3 each). Use our online Cell Battery Chart to find equivalent battery.
• To replace the batteries: Use a #1 Phillips Head Screwdriver to remove the cover. Remove the old batteries and dispose properly.
• Each battery (+) side must be oriented towards the spring. Place first battery next to the spring and continue.
• Reinstall battery cover.

Note: When you remove the batteries, the SRM retains the recording until you install new batteries and/or make a new recording.

If you do not plan to use the SRM for a month or longer, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.

WARRANTY - 2 YEAR FROM DATE OF PURCHASE

CARE - To enjoy your SRM for a long time:

• Keep it dry. If it gets wet, wipe it dry immediately.
• Use and store the SRM only in normal temperature environments.
• Handle the SRM gently and carefully. DO NOT DROP IT.
• Keep the SRM away from dust and dirt.

MODIFYING OR TAMPERING WITH THE SRM's INTERNAL COMPONENTS CAN CAUSE A MALFUNCTION AND WILL INVALIDATE ITS WARRANTY.

SPECIFICATIONS

Copyright © Train Set Electronics. All rights reserved.