
Train Set Electronics RSM and SRM sound recording modules are designed to be flexible and with multiple choices. In this document we'll try to describe few of them. Use your creativity and try other ways.
- RSM series - Check the size of the module, ensure that it will fit in the intended location (freight car, caboose, engine or locomotive). Record your preferred sound and place the module in it's location. Place the Magnet (provided with the product) on the layout anywhere but not to a distance greater then 1 1/4 inch. The magnet ca be painted, it will not interfere with it's magnetic capability. The Magnet can be placed in a less seen location on the layout. Remember that it has to be placed in a location no greater than 1 1/4 inch. When the car travels on the track by the Magnet, the Reed Switch will close and your recording will start playing. It will stop based on the length of the recording from 0-20 seconds. The Sound recorded will travel with the train giving a moving sound.
- SRM series - It works when the "P" button is pressed or other type of momentary contact closes the circuit. The unit can be placed anywhere on the layout. Wires can be extended up to 25 feet. We also offer the RDM a Reed Switch and Magnet kit. If preferred the Magnet could be placed in the train car and the Reed Switch on the layout with it's extended wires connected or soldered in the parallel with "P" button. The Reed Switch must be placed at distance of up to 1 1/4 inches from the traveling Magnet and the module in a concealed location or anywhere on the layout. When the train car with the magnet will pass by the Reed Switch the recorded sound will play. This will give a stationary sound.
How to use multiple RSM or SRM
Be creative - make it FUN
Bring life to your Model Train Layout with EZ-Sound Recorders
The benefits of EZ-Sound Recorders are compelling:
Eliminate all that button pushing.
Stand alone sound modules.
Integrate with your existing Model Train Layout.
Add character to your new Model Train Layout.
RSM and SRM offered to match any Train Scale.
Use Our Train Sound Studio - Select Any Sound Anytime After You Receive Our EZ-Sound.
Copyright © Train Set Electronics. All rights reserved.