Your - LT Series Product - is a Lighting Kit that includes Lamps, LH6 and PAC Transformer.

The LH6 - EZCONEX™ - "A easy way to change a lamp without getting under the layout." 

This lamp holder has unique 3-finger design terminals. It will mate and hold round, square or rectangular leads.

INSTALLING THE LAMPS

• Measure 7/16 inch from the bottom of the Lamp and mark.
• Cut the Lamp leads using a pair of sharp lead cutters.
• Carefully insert the lamp into the LH6.
• Connect to your circuit.

WHERE TO USE

• Buildings interior lighting.
• Create a flood light. Use a small piece of aluminum foil and a pencil to create the cone shape.
• Insert multiple lamps and create a dinning room chandelier.
• A front porch ceiling fan. Use Elmer's glue and toothpicks to make the fan blades.
• Make multicolor clusters.
• Create outdoor ornamental lights.
• Make your own miniature light rope.

Note: Ensure that all lamps are connected in parallel. Insulate exposed leads to prevent shorting.

         If you need more information please contact us.  

WARRANTY - 2 YEAR FROM DATE OF PURCHASE

CARE - To enjoy your LT kit for a long time:

• Keep it dry. If it gets wet, wipe it dry immediately.
• Use and store the LT kit only in normal temperature environments.
• Handle the LH6 lamp holders gently and carefully. Do not pull the wires from the holder.

MODIFYING OR TAMPERING WITH THE LH6 or PAC INTERNAL COMPONENTS CAN CAUSE A MALFUNCTION AND WILL INVALIDATE ITS WARRANTY.

SPECIFICATIONS

Copyright © Train Set Electronics. All rights reserved.